◆ 주파수 범위 : 1uHz~20MHz/30MHz
◆ 주파수 분해능 : 1uHz
◆ 채널 : 1CH/2CH
◆ 디스플레이 : 4.3" LCD
◆ 통신 인터페이스
   - 기본 장착 : USB(Host/Device), LAN
   - 옵션 장착 : GPIB
◆ 지원 기능
   - 기본 파형 : Sine, Square, Triangle, Ramp, Pulse, Noise, Harmonic
   - 변조 파형 : AM, FM, PM, PWM, FSK, SUM, Sweep, Burst
   - 2CH 기능 (AFG-30x2 모델) : SUM, Coupling, Tracking, Phase
   - 임의파형
     → 샘플링 속도 : 250MSa/s
     → 진폭 분해능 : 16비트
     → 파형 길이 : 8Mpts

GW Instek rolls out the new AFG-3000 series arbitrary function generators, including 20MHz/30MHz single channel and dual channel models, designed to meet industry, scientific research, and education applications. In the design of isolated output, all output channels are earth ground isolation, which is suitable for test applications of floating circuit. For instance, connecting an AFG-3000 with a power supply’s DC voltage, the maximum AC-DC cascaded output reaches +42V or -42V. Each channel of dual channel models can be operated independently or multi units can simultaneously function without taking grounding reference into consideration. Applications are, for instance, the ignition control or transmission device of automotive electronics. The series features sample rate of 250MSa/s, 16-bit resolution, and 8M point memory depth for arbitrary waveform generation. Users not only can save the edited waveforms to the memory to build arbitrary waveforms, but also rebuild waveforms by the AFG-3000’s built-in DSOLink function with a GW Instek digital storage oscilloscope.

The AFG-3000 series supports synchronized phase for multi channel operation up to 6 units and 12 channels. A reference input connector is available allowing an external 10 MHz time base to synchronize the internal clock and elevate the frequency output accuracy. The series supports frequency sweep and amplitude sweep that can also integrate other functions, including linear/logarithm, one-way (saw tooth)/two-way (triangle), continuous/single trigger/gated trigger to meet various application requirements by applying different sweep methods. Frequency sweep tests the frequency response of electronic components such as filter and low frequency amplifier. Amplitude sweep simulates vibration tests (requires a vibration tester), and it also conducts aging tests of various materials and linearity tests of low frequency amplifier.

The main features of the AFG-3000 series include output amplitude from 1mVpp to 10Vpp (connected with a 50 ohm load); frequency range from 1uHz to 20MHz or 30MHz; 1uHz frequency resolution; and built-in sine, square, pulse, triangle, ramp, DC voltage, harmonic and noise. The waveform width, rise edge time and fall edge time of pulse waveform can be adjusted flexibly. Pulse waveform, with duty cycle from 0.017% to 99.983%, can be applied as trigger signals. Users can conduct arbitrary editing via 65 built-in function waveforms. The series supports AM/FM/PM/FSK/PWM modulation, frequency sweep, amplitude sweep and burst to satisfy industrial application requirements. Dual channel models provide SUM modulation, coupling, tracking, and phase to meet the test requirements of differential signal, phase control and amplifier distortion. Built-in 8th harmonic signal generator simulates harmonic signal of switching power supplies and it also tests EMI power filter characteristics. The AFG-3000 series provides free arbitrary waveform editing software (AWES) for users to quickly edit waveforms from the built-in diagrams so as to execute measurements.

The AFG-3000 series comes with four models. Model number and channel (s) are listed as follows:

(1). A total of ten waveforms can be stored. (Every waveform can composed of 8M points maximum.)
(2). Add 1/10th of output amplitude and offset specification per ℃ for operation outside of 0℃ to 28℃ range (1-year specification).
(3). Edge time decreased at higher frequency.
(4). Sine and square waveforms above 25 MHz are allowed only with an "Infinite" count.
(5). Harmonic distortion and Spurious noise at low amplitudes is limited by a -70 dBm floor.

  ◆ 퀵 스타트 가이드 × 1
  ◆ 사용 설명서 CD ×1
  ◆ AFG-3031/3021 : 테스트 리드 GTL-101 x 1
  ◆ AFG-3032/3022 : 테스트 리드 GTL-101 x 2

추가 구매 가능 구성품
  ◆ 옵션.01 : GPIB 인터페이스
  ◆ GTL-246 : USB 케이블, AB 타입

> GWINSTEK, AFG-3021, AFG-3031, AFG-3021G, AFG-3031G, AFG-3022, AFG-3032, AFG-3022G, AFG-3032G, 1채널 임의파형 발생기, 2채널 임의파형 발생기, 신호발생기, 함수발생기, 펑션제너레이터, Arbitrary Function Generator, Function Generator, Signal Generator, GW 인스텍, 굿윌인스텍, 한국굿윌인스텍  

> 판매처 : 제이시스템즈