◆ 주파수 범위 : 34.5MHz~4400MHz
◆ 출력 전력 : -30dBm~0dBm
◆ CW(Continuous Wave) 신호 출력
◆ 고정 주파수, 주파수 스윕/호핑, 전력 스윕 모드
◆ 위상잡음 : -107dBc/Hz @ 100kHz offset
◆ 주파수 분해능 : 10kHz
◆ USB 인터페이스
◆ PC 제어 소프트웨어
GW Instek debuts the brand new USG-Series RF signal generator, which comes with five models to meet users’ requirements and is a pocket-sized, and USB interface compatible RF signal generator with the frequency range from 35MHz to 4400MHz. The USG-Series provides continuous wave (CW) signal outputs without any signal modulation function. The built-in electronic attenuator of the USG-Series allows an adjustable power range from -30dBm to 0dBm. The USG-Series has several operational modes including fixed frequency, frequency sweep, frequency hopping, and power sweep. The USB-Series RF signal generator, with the frequency bandwidth limitation, provides lower harmonic output performance.
Figure shows the test result of USG-LF44 simultaneous power sweep and frequency sweep. The test result covers the frequency range from 35MHz to 4400MHz and the power range from -30dBm to 0dBm. The yellow trace illustrates the test result of maximum hold and the pink trace shows the test result of signal output.
GW Instek USG RF Portable Signal Generator
GW Instek USG RF Signal Generator PC Application Program Introduction
Primary RF Software Demo ( USG RF Signal Generator & GSP-730 Spectrum Analyzer)
A USG CD-ROM provides dedicated PC application programs, which were developed under JAVA software* structure. Users must install JAVA software to use USG PC application programs, which support operating systems such as Windows 2000/XP/Vista/7/8, Linux & Mac OS X through the USB interface.
Users can download USG APP to smart phone or tablet with Android 4.0 or above. To operate USG, use USB-OTG connecting cable to connect tablet (or smart phone) and USG. The Android APP application software for the USG signal generator is available on Google Play Store.
The USG signal generator can be designated as the tracking generator for GSP-730 spectrum analyzer to conduct measurement functions of scalar network analyzer. A USG CD-ROM provides PC application programs for the Primary RF software. Users can, using a Windows OS computer, control USG and GSP-730 via the Primary RF software. The NI-488.2 software** must be installed first before installing Primary RF software.
◆ USB 케이블 x 1
◆ CD(USG 소프트웨어, GSP-730 Primary RF 소프트웨어, 사용 설명서) x 1
추가 구매 가능 구성품
◆ ADP-003 : 50 Ohm N type (female) to SMA (female) Adapter
◆ GTL-303 : 50 Ohm SMA RF cable (600mm)
글 작성시 설정한 비밀번호를 입력해 주세요.확인
상품이 장바구니에 담겼습니다.
찜 리스트 담기
상품이 찜 리스트에 담겼습니다.